Indirect Fired Heaters For Job sites in Fort McMurray

Indirect fired heaters operate like your gas burning furnace at home. A heat exchanger creates warm, dry air that never comes into contact with the burn chamber’s flame. Unlike their direct fired counterparts, vented construction heaters are ideal for use in enclosed work spaces.

Discover the Advantages of Indirect Fired Heating

Any location where the temperature is cold and the space is tightly sealed could benefit from the use of an indirect fired heater. As long as you have a chimney to vent and ducting to distribute the clean air, you’ll be assured a comfortable temperature. The indirect fired heaters we provide our customers feature many benefits.

  • Easy to set up and move
  • Familiar to most customers
  • Dry heat
  • No risk of carbon dioxide


Brands and Application

Frost Fighter 350kbtu or 500kbtu

  • Propane, natural gas or diesel fired
  • Maximum 24’ ducting

Campo 350kbtu

  • Propane, natural gas or diesel fired
  • Maximum 24’ ducting

Wacker 400kbtu

  • Propane or natural gas
  • Maximum 80’ ducting

Flagro 400kbtu

  • Propane, natural gas or diesel
  • Maximum 24’ ducting

Large Indirect Heaters

Our larger indirect heaters offer very high cfm and static pressure for excellent drying capabilities. You can trust the following names for lower equipment costs, low labour (service calls) and lower fuel costs.


Thermobile 700kbtu

  • Propane, natural gas or diesel fired
  • Maximum 200’ ducting
  • Great building heat and air flow

Wacker 700kbtu

  • Propane, natural gas or diesel fired
  • Maximum 120’ ducting
  • Great building heat and air flow

ICE Fighter 700kbtu

  • Propane or natural gas
  • Maximum 24’ ducting


Campo 1mmbtu Indirect

  • Propane, natural gas or diesel
  • 12,000 cfm

Indirect Fired Glycol Heaters: DryAir or Quest

DryAir 250kbtu Central Heating Unit

  • Ground thaw
  • Concrete curing
  • Building heat
  • LP or NG

Ground Heater E3000

  • Ground thaw
  • Diesel

DryAir 1 2mmbtu Central Heating Unit

  • Ground thaw
  • Concrete curing
  • Building heat
  • LP or NG

The Cons of Indirect Heaters

Indirect fired heaters are a fixed location solution, but are they the right solution for you? When it comes to your work site, bigger isn’t always better. Don’t get stuck with higher equipment costs and congestion. At Ignite Rental Solutions Ltd, you always have options. Why rely on a large vented unit when a portable direct fired heater may be the better choice? Talk to the experienced pros at Ignite Rental Solutions Ltd. We only deal with dependable heating brands. Over the years, we’ve come to discover that inferior products suffer the same issues:

  • Inefficient design
  • Limited ducting
  • Low air flow, low cfm and low static (which limits proper heat distribution)
  • High service call ratio

Remote Monitoring Capability

Not only do we provide the commercial equipment you need, but we can also provide you with remote monitoring capabilities for the job site. Our monitoring devices can be installed anywhere within a structure for additional peace of mind. When you can’t be there, our control mechanism will provide you with the following information:

  • Temperature high/low
  • Relative humidity high/low
  • Device on/off (most commonly used to determine if a heater is on/off)

Notifications can be sent to anyone via email or text. In the case of an emergency, our technicians are usually the first to arrive, even prior to your first notification. Contact our team in Fort McMurray to get an estimate.

► Whether you require a single phase heater, a Toaster™ or our Thermobile 700kbtu, our team is anxious to receive your call. Get in touch with us today!

Created by

Legal notice